T3-2 startup

[cah]

Main data center had a power outage due to A/C failure, all SUN servers but 4 (oraint02, appint04, appzone01 and orazone01) came back up automatically after regaining power.

oraint02 came up after power cycling and pressing the power up button.
The other three had to come from ILOM start up.

Appint04's ILOM had "poweron" to power on the system. Then, it came up fine.
I needed to run "start /SP/console" to get into console on appzone01. It was sitting at Ok prompt. I had to run "boot" to bring up the OS. Then, it came up fine.
orazone01 is a little different. It was not responding to commands like appzone01. The reason was the power was off. I had to run "start /SYS" to power it up. Then, I needed to "start /SP/console" to get in and run "boot" from Ok prompt.

After OS is up, NGZs didn't come up. I was trying to start them up manually but they complained about filesystems.
I checked from "ZFS Administration" on orazone01 (https://orazone01.ols.minimed.com:6789/ ... dule/Index) and unounted all filesystems on each NGZ and started each of them. They came up fine. I just had to mount all filesystems after all NGZs came up.

Something to remember!